Maximum Marks: 100 Time: - 3 Hours
The Paper shall be divided
into (04) Sections which shall cover prose & poetry from Chinar-II apart
from writing skills & grammar.
Prose:
One seen passage from Chinar-II with internal choice followed by questions, fill in
the blanks, true false etc. shall be asked to the student of (05) Marks.
One unseen passage with internal choice followed by
questions, fill in the blanks, true false etc. shall be asked to the student of (05) Marks
One reference to context type question based on the
prose passage from Chinar II of 05
Marks. One to be attempted out of three.
Two questions of 04Marks each based on the textbook
titled Chinar-II of 100-150
words to be attempted out of given four questions. [4 × 2 = 8] Marks
One long Answer type question based on character
study/description of scene/ theme /style to be attempted with internal choice. [5 × 1 = 5] Marks
02 objective type questions to be asked based on
vocabulary, biographical information of the writer/ textual information. Each
question shall carry (1/2) Mark [1/2 ×4 = 2] Marks
30 Marks
Poetry:
One seen stanza of poem from Chinar-II with internal choice followed by questions, fill in
the blanks, true false etc. shall be asked to the student of (05) Marks.
One unseen stanza of poem with internal choice
followed by questions, fill in the blanks, true false etc. shall be asked to
the student of (05) Marks.
One reference to context type question based on the
poem from Chinar II of 05 Marks. One
to be attempted out of three.
Four questions of 02 Marks each based on literary
devices (metaphor, simile, hyperbole, personification, imagery, irony, paradox
etc.) from poems in Chinar-II of
50-100 words to be attempted. Four questions to be done out of six. [2 × 4] = 8 Marks
23 Marks
Writing Skills:
a)
Article/paragraphing
writing with clues (narrative or descriptive)
05 Marks
b)
Letter (personal
or official) 05 Marks
c)
Diary entry,
Notemaking, Dialogue, Report Writing, Advertisement, Poster, E-mail or sms. (15
marks)
25 Marks
Grammar:
i)
Compound and
Complex Sentences [03
Marks]
ii)
Tense (Present,
Past, Future) [04
Marks]
iii)
Auxiliary Verb [01
Marks]
iv)
Relative Clause [02
Marks]
v)
Conditional
Clause [02
Marks]
vi)
Reported Speech [02
Marks]
vii)
Passives [02
Marks]
viii)
Article [02
Marks]
ix)
Preposition [02
Marks]
x)
Conjunction [02
Marks]
(22) Marks
Pattern of Paper
SECTION A
Reading Comprehension——— (20) Marks.
Q
1.1 Two seen passages/stanzas each from prose and poetry, from Chinar-II with
internal choice followed by questions, fill in the blanks, true/false etc.
shall be asked to the student each of (05) Marks. [5 × 2] = 10 Marks.
Q
1.2 Two unseen passages/stanzas, one from prose and one from poetry with
internal choice followed by questions, fill in the blanks, true/false shall be
asked to the student, each of (05)Marks. [5 × 2] = 10 Marks
Total (20) Marks
SECTION B
Literature ——— (33 Marks)
Q
3.1 Two questions based on textbook titled Chinar-II of 100-150 words to be attempted out of given four
questions. [4 × 2 = 08] Marks
Q
3.2 One long answer type question based on character study/description of
scene/theme/style to be attempted with internal choice . [5
× 1 = 05] Marks
Q
3.3 Four very short answer type questions of two marks each based on literary
devices and general to be attempted out of nine (metaphor, simile, hyperbole,
personification, imagery, irony, paradox etc.) [4 × 2 = 08] Marks
One reference to context type question to be
attempted out of three based on the prose from Chinar II of 05 Marks
One reference to context type question to be
attempted out of three based on the poem from Chinar II of 05 Marks
Q
3.4 (04) objective type questions to be asked based on vocabulary, biographical
information of the writer/ textual information. Each question shall carry ½
mark. [1/2 × 4 = 2 Marks]
Total (33) Marks
SECTION C
Writing Skills———
(25) Marks
Q
2.1 One question on paragraph writing / article writing (Narrative or
Descriptive) to be attempted with internal choice (100—150 Words) [5 × 1] = 05 Marks.
Q
2.2 One task on letter writing (Personal & Official) to be attempted with
internal choice.
[5 × 1] = 05 Marks.
Q
2.3 One task to be attempted on note making or diary entry.
[5× 1] = 05 Marks.
Q
2.4 One task to be attempted on dialogue writing or report writing (80-100
Words) [5 × 1] = 05 Marks.
Q
2.5 One task to be attempted on writing of advertisement or designing a poster
(50-80) Words [3 × 1] = 03 Marks.
Q
2.6 One task to be attempted on e-mail writing or sms. [2 Marks]
Total (25) Marks
SECTION D
Grammar—— (22
Marks)
i)
Compound and
Complex Sentences [03
Marks]
ii)
Tense (Present,
Past, Future) [04
Marks]
iii)
Auxiliary Verb [01
Marks]
iv)
Relative Clause [02
Marks]
v)
Conditional
Clause [02 Marks]
vi)
Reported Speech [02
Marks]
vii)
Passives [02
Marks]
viii)
Article [02
Marks]
ix)
Preposition [02 Marks]
x)
Conjunction [02
Marks]
MATHEMATICS
Theory: Marks 100 Time allowed: 03 hrs.
I.
RELATIONS AND
FUNCTIONS Marks
10
II.
ALGEBRA Marks
13
III.
CALCULUS Marks
44
IV.
VECTORS AND
THREE-DIMENSIONAL GEOMETRY Marks 17
V.
LINEAR
PROGRAMMING Marks
06
VI.
PROBABILITY Marks 10
UNIT I. RELATIONS AND FUNCTIONS
1. Relations and Functions
Types of relations: reflexive, symmetric, transitive
and equivalence relations. One to one and onto functions, composite functions,
inverse of a function. Binary operations.
2. Inverse Trigonometric Functions
Definition, range, domain, principal value branches.
Graphs of inverse trigonometric functions. Elementary properties of inverse
trigonometric functions.
UNIT-II: ALGEBRA
1. Matrices
Concept, notation, order, equality, types of matrices,
zero matrix, transpose of a matrix, symmetric and skew symmetric matrices.
Addition, multiplication and scalar multiplication of matrices, simple
properties of addition, multiplication and scalar multiplication.
Non-commutativity of multiplication of matrices and existence of non-zero
matrices whose product is the zero matrix (restrict to square matrices of order
2). Concept of elementary row and column operations. Invertible matrices and
proof of the uniqueness of inverse, if it exists; (Here all matrices will have
real entries).
2. Determinants
Determinant of a square matrix (up to 3 x 3
matrices), properties of determinants, minors, cofactors and applications of
determinants in finding the area of a triangle. Adjoint and inverse of a square
matrix. Consistency, inconsistency and number of solutions of system of linear
equations by examples, solving system of linear equations in two or three
variables (having unique solution) using inverse of a matrix. Cramer’s rule and
its applications.
UNIT-III: CALCULUS
1. Continuity and Differentiability
Continuity and differentiability, derivative of
composite functions, chain rule, derivatives of inverse trigonometric
functions, derivate of implicit functions. Concept of exponential and
logarithmic functions to the base e.
Logarithmic functions as inverse of exponential
functions.
Derivative of logarithmic and exponential functions.
Logarithmic differentiation, derivative of functions expressed in parametric
forms. Second order derivatives. Rolle’s and Lagrange’s Mean Value Theorems
(without proof) and their geometric interpretations and simple applications.
2. Applications of Derivatives
Applications of derivatives: rate of change,
increasing/decreasing functions, tangents & normals, approximation, maxima
and minima (first derivative test motivated geometrically and second derivative
test given as a provable tool). Simple problems (that illustrate basic
principles and understanding of the subject as well as real-life situations).
3. Integrals
Integration as inverse process of differentiation.
Integration of a variety of functions by substitution, by partial fractions and
by parts, only simple integrals of the type to be evaluated.
Definite integrals as a limit of a sum, Fundamental
Theorem of Calculus (without proof). Basic properties of definite integrals and
evaluation of definite integrals.
4. Applications of the Integrals
Applications in finding the area under simple
curves, especially lines, areas of circles/ parabolas/ellipses (in standard
form only), area under the curve y = sin x, y = cos x, area between the two
above said curves (the region should be clearly identifiable).
5. Differential Equations
Definition, order and degree, general and particular
solutions of a differential equation. Formation of differential equation whose
general solution is given. Solution of differential equations by method of
separation of variables, homogeneous differential equations of first order and
first degree. Solutions of linear differential equation of the type:
UNIT IV: VECTORS AND THREE-DIMENSIONAL GEOMETRY
1. Vectors
Vectors and scalars, magnitude and direction of a
vector. Direction cosines/ratios of vectors. Types of vectors (equal, unit,
zero, parallel and collinear vectors), position vector of a point, negative of
a vector, components of a vector, addition of vectors, multiplication of a
vector by a scalar, position vector of a point dividing a line segment in a
given ratio. Scalar (dot) product of vectors, projection of a vector on a line.
Vector (cross) product of vectors. Scalar triple product.
2. Three-dimensional Geometry
Direction cosines/ratios of a line joining two
points. Cartesian and vector equation of a line, coplanar and skew lines,
shortest distance between two lines. Cartesian and vector equation of a plane.
Angle between (i) two lines, (ii) two planes. (iii) a line and a plane.
Distance of a point from a plane.
UNIT-V: LINEAR PROGRAMMING
1. Linear Programming
Introduction, definition of related terminology such
as constraints, objective function, optimization, different types of linear
programming (L.P.) problems, mathematical formulation of L.P. problems,
graphical method of solution for problems in two variables, feasible and
infeasible regions, feasible and infeasible solutions, optimal feasible
solutions (up to three non-trivial constraints).
UNIT-VI: PROBABILITY
1. Probability
Multiplication theorem on probability. Conditional
probability, independent events, total probability, Baye’s theorem, Random
variable and its probability distribution, mean and variance of random
variable. Repeated independent (Bernoulli) trials and Binomial distribution.
Suggested Textbook
Mathematics Textbook for Class XII, NCERT,
Publication.
PHYSICS
Maximum Marks: 100
Theory: Marks 70 Time: 3 hour
Practicals: Marks 30
I.
Electrostatics 08
marks
II.
Current
Electricity 07
marks
III.
Magnetic effects
of current and magnetism 08
marks
IV.
Electro-magnetic
induction and alternating currents 08
marks
V.
Electro-magnetic
waves 03
marks
VI.
Optics 14
marks
VII.
Dual nature of
matter and radiation 04
marks
VIII. Atoms and Nuclei
06
marks
IX.
Electronic
devices 07
marks
X.
Communication
system 05
marks
Unit I : Electrostatics
Electric charges; conservation of charge, coulomb’s
law – force between two point charges, forces between multiple charges,
superposition principle and continuous charge distribution.
Electric field, electric field due to point charge,
electric field lines, and electric dipole, electric field due to dipole, Torque
on a dipole in uniform electric field. Electric flux, statement of Gauss’s
theorem and its application to find field due to infinitely long straight wire,
uniformly charged infinite plane sheet and uniformly charged thin spherical
shell (field inside and outside).
Electric potential, potential difference, electric
potential due to point charge, a dipole and system of charges; equipotential
surfaces, electric potential energy of a system of two point charges and of
electric dipole in an electrostatic field.
Conductor and insulators, free charges and bound
charges inside a conductor. Dielectrics and electric polarization, capacitors
and capacitance, combination of capacitors in series and in parallel, capacitance
of a parallel plate capacitor with and without dielectric medium between the
plates, energy stored in a capacitor. Van de Graaff generator.
Unit-II : Current Electricity
Electric current, flow of electric charges in a
metallic conductor, drift velocity, mobility and their relation with electric current. Ohm’s law, electric
resistance. V-I. Characteristics, (linear, nonlinear), electrical energy and power, electric resistivity and
conductivity, carbon resistors, colour code
for carbon resistors; Temperature dependence of resistance.
Internal resistance of a cell, potential difference
and emf of a cell, combination of cells in series and in parallel. Elementary
idea of secondary cells. Kirchoff’s laws and their applications.Wheat stone
bridge, meter bridge.
Potentiometer-principle and its application to
measure potential difference and for comparing e.m.f. of two cells; measurement
of internal resistance of a cell.
Unit-III : Magnetic Effects of Current and Magnetism
Concept of magnetic field, Oersted’s experiment,
Biot-Savart law and its application to current
carrying circular loop. Ampere’s law and its applications to infinite long
straight wire, straight and toroidal solenoids.
Force on a moving charge in a uniform magnetic and
electric fields. Cyclotron. Force on a current carrying conductor in a uniform
magnetic field. Force between two parallel current carrying conductors-definition
of ampere.
Torque experienced by a current loop in uniform
magnetic field, moving coil galvanometerits current sensitivity and conversion
to ammeter and voltmeter.
Current loop as a magnetic dipole and its magnetic
dipole moment. Magnetic dipole moment of a revolving electron. Magnetic field
intensity due to a magnetic dipole (bar magnet) along its axis and perpendicular
to its axis. Torque on a magnetic dipole (bar magnet) in uniform magnetic
field, bar magnet as an equivalent solenoid, magnetic field lines, Earth’s
magnetic field and magnetic elements. Para, dia, and ferro-magnetic substances
with examples. Electromagnets and factors affecting their strength, permanent
magnets.
Unit IV : Electro-magnetic Induction and Alternating
Currents
Electromagnetic induction, Faraday’s laws, induced
e.m.f. and current; Lenz’s law, Eddy currents, self and mutual inductance.
Alternating currents, peak and rms value of
alternating current/voltage. Reactance and impedence, LC oscillations
(qualitative treatment only) & LCR circuits series, Resonance, power in A.C.
circuits, wattles current, AC Generator and transformer.
Unit-V : Electro-magnetic Waves
Need for displacement current, Electro-magnetic
waves and their characteristics (qualitative ideas only), transverse nature of
electromagnetic waves.
Electromagnetic spectrum (radio-waves, micro-waves,
infra-red, visible, ultraviolet, X-rays, gamma rays) including elementary facts
about their uses.
Unit VI : Optics
Ray Optics - Reflection of light; spherical mirrors;
mirror formula, Refraction of light- total internal reflection and its
applications, optical fibres, refraction at spherical surfaces, lenses, thin lenses
formula, lens-makers formula, Newton’s relation: displacement method to find
position of images (conjugate points), Magnification, power of lens,
combination of thin lenses in contact. Combination of a lens and a mirror,
Refraction and dispersion of light through a prism.
Scattering of light-blue colour of the sky and
reddish appearance of the sun at sunrise and sunset. Elementary idea of Raman
effect.
Optical instruments – Human eye, image formation and
accommodation, correction of eye defects (myopia, hypermetropia, presbyopia and
astigmatism) using lenses. Microscopes and astronomical telescopes (reflecting
and refracting) and their magnifying powers.
Wave optics-wave front and Huygen’s principle,
reflection and refraction of plane wave at a plane surface using wavefronts.
Proofs of laws of reflection and refraction using Huygen’s Principle, Interference,
Young’s double slit experiment and expression for fringe width, coherent
sources and sustained interference of light.
Diffraction due to a single slit, width of central
maximum. Resolving power of microscopes and astronomical telescopes.
Polarization, plane polarized light, Brewter’s law, uses of plane polarized light
and polaroids.
Unit VII : Dual Nature of Matter and Radiation
Dual nature of radiation. Photoelectric effect,
Hertz and Lenard’s observations; Einstein’s photoelectric equation- particle
nature of light.
Matter waves, wave nature of particles, de-Broglie
relation, Davisson- Germer experiment (experimental details should be omitted;
only conclusion should be explained).
Unit VIII : Atomic Nuclei
Alpha-particle scattering experiment, Rutherford’s
model of atom, Bohr’s Model of atom; energy levels, Hydrogen spectrum.
Continuous and characteristics of X-rays. Composition and size of nucleus;
atomic masses, isotopes, isobars, isotones, Radioactivity (alpha, beta and
gamma) particles/ rays and their properties, Radioactive decay law, Mass –
energy relation, mass defect, binding energy/nucleon and its variation with
mass no., nuclear fission and nuclear fusion.
Unit IX : Electronic Devices
Energy
bands in solids, conductors, insulators and semiconductors, semiconductor
diode, IV characteristics in forward and reverse bias, diode as a rectflier;
I-V characteristics of LED, photo diode, solar cell and Zener diode; Zener
diode as a voltage regulator, Junction transistors and its action;
characteristics of a transistor, transistor as an amplifier (common emitter
configuration and oscillator (common emitter). Logic gates (OR, AND, NOT),
concept of NAND and NOR gates, Transistor as a switch.
Unit X : Communication System
Elements of communication system (block diagram
only), Band width of signals (speech, T.V and digital data); bandwidth of
transmission medium, propagation of electromagnetic waves in the atmosphere,
sky and space wave propagation.
Need for modulation; Production and detection of an
amplitude modulated wave.
Practicals : 30 marks
A. External: 20
B. Internal:10
Every student will perform at least 15 experiments
(7 from section A & 8 from section B). The activities mentioned here should
be for the purpose of demonstration. One project of three marks is to be
carried out by the students.
Evaluation Scheme for Practical Examination:
·
One experiment
from each of the two sections = 10 marks
·
One activity
from each of the two sections (2 activities in total) = 2+2= 04 marks
·
Record of one
Investigatory Project and viva based on Project = 02 marks
·
Practical Record
of experiments and activities = 02 marks
·
Viva-voce on
experiments and activity = 02 marks
Total Marks = 20
Section – A
Experiments:
1.
To determine
resistance per cm. of a given wire by plotting a graph of pot. difference vs. current
(Ohm’s law).
2.
To find
resistance of a given wire using metre bridge and hence determine the specific resistance
of its material.
3.
To verify the
laws of combination (series/parallel) of resistance using a metre bridge.
4.
To compare the
e.m.f of two given primary cells using potentiometre.
5.
To determine
internal resistance of a given primary cell using potentiometre.
6.
To determine
resistance of a galvanometre by using half deflection method and also find its
figure of merit.
7.
To convert the
given galvanometre (of known resistance and figure of merit) into an ammetre
and voltmetre of desired range and to verify the same.
8.
To find the
frequency of the a.c. mains with a Sonometre.
Activities:
1.
To measure the
resistance and impedance of an inductor with or without iron care.
2.
To measure
resistance voltage (AC/DC), current (AC) and check continuity of a given circuit
using multi metre.
3.
To assemble a
household circuit comprising three bulbs, three (on/off) switches, a fuse and a
power source.
4.
To study the
variation in potential drop with length of a wire for a steady current.
5.
To draw the
diagram of a given open circuit comprising at least a battery, rheostat, key; ammetre
and voltmetre. Make the components that are not connected in proper order and correct
the circuit and also circuit diagram.
Section – B
Experiment:
1.
To find the
focal length of a convex mirror, using a convex lens.
2.
To find the
focal length of a concave lens using a convex lens.
3.
To find the
value of v for different values of u in case of a concave mirror and also to
find its focal length.
4.
To find the
focal length of a convex lens by plotting a graph between u and v or between I/u
and I/v.
5.
To determine
angle of minimum deviation (dm) for a given prism by plotting a graph between
angle of incidence and angle of deviation (dm).
6.
To determine
refractive index of a glass slab using a traveling microscope.
7.
To find
refractive index of a liquid using I) concave mirror II) convex lens and plane mirror.
8.
To draw the
characteristics of a common-emitter npn or pnp transistor and to find out the values
of current and voltage gains.
9.
To draw the I-V characteristics
curve of a p-n junction in forward bias and reverse bias.
10. To draw the characteristic curve of a zener diode
and to determine its reverse break down voltage.
Activities:
1.
To study effect
of intensity of light by varying distance of the source on an L.D.R.
2.
To identify a
diode, a LED, a transistor, and IC, a resistor and a capacitor from mixed collection
of such items.
3.
Use of
multimetre to i) identify base of transistor ii). Distinguish between npn and
pnptransistors iii) see the unidirectional flow of current in case of a diode
and an LED. iv) Check whether a given electronic component (e.g. diode,
transistor or IC) is in working order.
4.
To observe
refraction and lateral deviation of a beam of light incident obliquely on a
glass slab.
5.
To observe polarization
of light using two polariods.
6.
To observe
diffraction of light due to a thin slit.
7.
To study the
size and nature of the image formed by i) convex lens, ii) concave mirror, on a
screen by using a candle and screen for different distances of the candle from
the lens/mirror.
8.
To obtain a lens
combination with the specified focal length by using two lenses from the given
set of lenses.
Investigatory Projects:
1.
To investigate
whether the energy of a simple pendulum is conserved.
2.
To determine the
radius of gyration about the centre of mass of a scale used as a bar pendulum.
3.
To investigate
changes in the velocity of a body under the action of a constant fare and determine
its acceleration.
4.
To compare
effectiveness of different materials as absorbers of sound of heat.
5.
To determine the
wave length of laser beam by diffraction.
6.
To study various
factors on which the internal resistance, emf of a cell depends.
7.
To construct a
time switch and study dependence of its time constant on various factors.
8.
To study infrared
radiations emitted by different sources using photo-transistor.
9.
To compare
effectiveness of different materials and insulators.
10. To design an automatic traffic signal system using
suitable combination of logic gates.
11. To study luminosity of various electric lamps of
different powers and make.
12. To compare the Young’s modulus of elasticity of
different specimens of rubber and also draw their elastic hysterises curve.
Book Suggested:
A Textbook of Physics for class XII published by
NCERT, New Delhi.
CHEMISTRY
Maximum Marks: 100
Theory: Marks 70 Time: 3 hour
Practicals: Marks 30
I.
Solid State 4
marks
II. Solutions 5
marks
III. Electrochemistry 5
marks
IV. Chemical Kinetics 5 marks
V. Surface Chemistry 4 marks
VI. General Principles and Processes of Isolation of Elements 3
marks
VII.
p-Block Elements 8 marks
VIII. d- and f- Block Elements 5 marks
IX. Coordination Compounds 3
marks
X. Haloalkanes and Haloarenes 4
marks
XI. Alcohols, Phenols and Ethers 4
marks
XII.
Aldehydes, Ketones and Carboxylic Acids 6
marks
XIII. Organic Compounds containing Nitrogen 4 marks
XIV. Biomolecules 4
marks
XV. Polymers 3
marks
XVI. Chemistry in Everyday Life 3
marks
Unit-I: SOLID STATE
Classification of
solids based on different binding forces: molecular, ionic, covalent and metallic
solids, amorphous solids and crystalline solids (elementary idea only), unit
cell in two dimensional & three dimensional lattices, packing efficiency,
calculation of density of unit cell, packing in solids, voids, number of atoms
per unit cell in a cubic unit cell, point defects. Properties of solids
(electrical, magnetic & dielectric), Band theory of metals, conductors,
semi-conductors and insulators and n & p type semiconductors.
Unit-II: SOLUTIONS
Types of solutions,
expression of concentration of solutions of solids in liquids, solubility of gases
in liquids, solid solutions, colligative properties: relative lowering of vapor
pressure of a solution, Raoult’s law, elevation of boiling point, depression in
freezing point temperature and osmotic pressure), determination of molecular
masses using colligative properties. Abnormal molecular mass, van’t Hoff factor
and calculations involving it..
Unit-III:
ELECTROCHEMISTRY
Redox reactions,
conductance in electrolytic solutions, specific conductivity, molar conductivity,
variation of conductivity with concentration, Kohlrausch’s law and its
applications Electrolysis and laws of electrolysis (elementary idea), dry cell-
electrolytic cells and galvanic cells; lead accumulator, emf of a cell,
standard electrode potential, Nernst equation and its application to chemical
cells, relation between Gibb’s energy change and emf of a cell, fuel cells,
corrosion
Unit-IV: CHEMICAL
KINETICS
Rate of reaction
(average and instantaneous rate of a reaction), factors affecting rate of reactions:
(concentration, temperature, catalyst), rate law, specific rate constant and
order, molecularity of a reaction, integrated rate expression of zero and first
order reactions and their derivations, half life period. Concept of collision
theory (elementary idea, no mathematical derivation), Activation energy,
Arrhenius equation.
Unit-V: SURFACE CHEMISTRY
Adsorption- physical
and chemical adsorption, factors affecting adsorption of gases on solids; Catalysis:
homogeneous and heterogeneous, activity& selectivity. Enzyme catalysis,
Colloidal state: distinction between true solution, colloids and suspensions.
Types of colloids- lyophilic and lyophobic, multimolecular, macromolecular and
associated colloids (micelles), properties of colloids: Tyndall effect,
Brownian movement, Electrophoresis, Coagulation, Emulsions-types of emulsions.
Elementary idea about nanomaterials.
Unit-VI: GENERAL
PRINCIPLES AND PROCESSES OF ISOLATION OF ELEMENTS
Principles and methods
of extraction: concentration, oxidation, reduction, electrolytic method &
refining; occurrence & principles of extraction of aluminium, copper, zinc
and iron.
Unit- VII: p-BLOCK
ELEMENTS
Group 15 Elements: General introduction,
electronic configuration, occurrence, oxidation states, trends in physical and
chemical properties; nitrogen: preparation, properties & uses. Compounds of
nitrogen: preparation & properties of ammonia and nitric acid, oxides of
nitrogen (structure only), Phosphorus – allotropic forms; compounds of
phosphorus: preparation & properties of phosphine, halides (PCl3, PCls) and
oxo- acids (elementary idea only).
Group 16 Elements: General introduction,
electronic configuration, occurrence, oxidation states, trends in physical and
chemical properties; dioxygen: preparation, properties & uses. Classification
of oxides; ozone. Sulphur- allotropic forms; compounds of sulphur: preparation,
properties & uses of SO2 and Sulphuric acid: industrial process of manufacture,
properties and uses, other oxides and oxoacids of sulphur (structures only).
Group 17 Elements: General introduction,
electronic configuration, oxidation states, trends in physical and chemical
properties; compounds of halogens-preparation, properties and uses of Chlorine
and hydrochloric acid, interhalogen compounds, oxoacids of halogens (structures
only)
Group 18 Elements: General introduction,
electronic configuration, occurrence, trends in physical & chemical
properties & Uses.
Unit- VIII: d and f
–BLOCK ELEMENTS
General introduction,
electronic configuration, occurrence and characteristics of the transition metals,
general trends in properties of first row transition metals (metallic
character, IE, electrode potential, oxidation state, ionic radii, catalytic
properties, colored ions, complex formation, magnetic properties, interstitial
compounds, alloy formation). Preparation and properties of K2 Cr2 O7 and KMnO4
Lanthanides: electronic
configuration, oxidation state, chemical reactivity and lanthanide contraction
and its consequences.
Actinides- electronic
configuration, oxidation states and comparison with lanthanoids.
Unit- IX: CO-ORDINATION
COMPOUNDS
Co-ordination
compounds: Introduction, ligands, co-ordination number, color, magnetic properties
and shapes, IUPAC nomenclature of mononuclear co-ordination compounds. Bonding (Werner’s
theory, VBT and CFT); structural and stereoisomerisms, importance of
coordination compounds in qualitative inclusion of analysis, extraction of
metals and biological systems.
Unit-X: HALOALKANES AND
HALOARENES
Haloalkanes: Nomenclature, nature of
C-X bond, physical & chemical properties, mechanism of substitution
reactions. Stability of carbocations, R-S and d-l configurations.
Haloarenes: Nature of C-X bond, substitution
reactions (directive influence of halogens for monosubstituted compounds only),
Stability of carbocations, R-S and D-L configurations Uses and environmental
effects of– dichloromethane, trichloromethane, tetrachloromethane, iodoform, freon,
and DDT.
Unit- XI: ALCOHOLS,
PHENOLS AND ETHERS
Alcohols: Nomenclature, methods
of preparation, physical & chemical properties (of primary alcohols only),
identification of primary, secondary & tertiary alcohols; mechanism of
dehydration of alcohols, uses, some important compounds – methanol and ethanol.
Phenols: Nomenclature, methods
of preparation, physical & chemical properties, acidic nature of phenol,
electrophillic substitution reactions, uses of phenols.
Ethers: Nomenclature, methods
of preparation, physical & chemical properties and uses.
UNIT- XII: ALDEHYDES,
KETONES AND CARBOXYLIC ACIDS
Aldehydes and Ketones: Nomenclature, nature of
carbonyl group, methods of preparation, physical & chemical properties
& mechanism of nucleophilic addition reaction to C = O group, reactivity of
alpha hydrogen in aldehydes, uses.
Carboxylic Acids: Nomenclature, acidic
nature, methods of preparation, physical & chemical properties and uses
UNIT- XIII: ORGANIC
COMPOUNDS CONTAINING NITROGEN
Amines: Nomenclature, classification,
structure, methods of preparation, physical & chemical properties, uses,
identification of primary, secondary & tertiary amines.
Cyanides and Isocyanides:
Structures
of cyanide and isocyanide groups, nomenclature, preparation, physical properties
and chemical reactions.
Diazonium Salts: Preparation and
chemical reactions (mechanism of diazotization), and importance in synthetic
organic chemistry.
UNIT- XIV: BIOMOLECULES
Carbohdrates: Classification (aldoses
and ketoses), monosaccharides: Glucose, fructose: structure, preparation and
chemical reactions; oligosaccharides (sucrose, lactose & maltose)
Polysaccharides: (starch, cellulose and glycogen); importance.
Proteins: Elementary idea of
amino acids: peptide bond, polypeptides and primary, secondary, tertiary and
quaternary structure of proteins (Qualitative idea only). denaturation of
proteins; enzymes, lipids & harmones, their classification & functions.
Nucleic Acids: DNA and RNA (purines
and pyrimidines, nucleosides, nucleotides and fragments up to four
nucleotides).
Vitamins: Classification and
functions, sources and deficiency diseases.
UNIT- XIV: POLYMERS
Natural & synthetic
polymers, methods of polymerization (addition and condensation),
copolymerization, and some important polymers: natural and synthetic like
polythene, nylon, Bakelite, polyesters and rubber. Biodegradable and non-
biodegradable polymers.
Unit-XVI: CHEMISTRY IN
EVERYDAY LIFE
(i)
Chemicals in medicine and health care- analgesics,
tranquillizers, antiseptics, disinfectants, antimicrobials, anti-fertility
drugs, anti-histamines, antibiotics, antacids.
(ii)
Chemicals in food- preservatives, artificial sweetening agents.
(iii)
Cleansing agents – Soaps and detergents, cleansing action.
PRACTICALS
A.
External: 20
B.
Internal:10
Evaluation Scheme for
Practical Examination:
Ø Volumetric analysis = 06 marks
Ø Salt Analysis = 06 marks
Ø Content based
experiment = 04 marks
Ø Class record, Project
work and viva = 04 marks
Total = 20 marks
A. SURFACE CHEMISTRY
(i)
Preparation of one lyophilic and one lyophobic sol
Lyophilic sol-starch, egg albumin and gum
Lyophobic
sol-aluminium hydroxide, ferric hydroxide, arsenious sulphide.
(ii)
Study of the role of emulsifying agents in stabilizing the
emulsion of different oils.
B. CHEMICAL KINETICS
(i)
Effect of concentration and temperature on the rate of reaction
between sodium thiosulphate and hydrochloric acid.
(ii)
Study of reaction rates of any one of the following:
a)
Reaction of iodide ions with hydrogen peroxide at room temperature
using different concentration of iodide ions.
b)
Reaction between potassium iodate (KIO3) and sodium sulphite
(Na2SO3) using starch solution as indicator (clok reaction).
C. THERMOCHEMISTRY
Any one of the following experiments:
(i)
Enthalpy of dissolution of CuSO4 or KNO3.
(ii)
Enthalpy of neutralization of strong acid (HCl) and strong base
(NaOH).
(iii)
Determination of enthalpy change during interaction (Hydrogen bond
formation) between acetone & chloroform.
D. ELECTRO CHEMISTRY
(i)
Variation of cell potential in Zn/Zn2+ // Cu2+/ Cu with change in
concentration of electrolytes (CuSO4 or ZnSO4) at room temperature.
E. CHROMATOGRAPHY
(i)
Separation of pigments from extracts of leaves and flowers by
paper chromatography and determination of RF values.
(ii)
Separation of constituents present in an inorganic mixture
containing two cations only (constituents having wide difference in RF values
to be provided)
F. PREPARATION OF
INORGANIC COMPOUNDS
(i)
Preparation of double salt of ferrous ammonium sulphate or potash
alum.
(ii)
Preparation of potassium ferric oxalate.
G. TEST FOR THE
FUNCTIONAL GROUPS PRESENT IN ORANIC COMPOUNDS
Unsaturation,
alcoholic, phenolic, aldehydic, ketonic, carboxylic and amino (primary) groups.
H. STUDY OF
CARBOHYDRATES, FATS AND PROTEINS IN PURE FORM AND DETECTION OF THEIR PRESENCE
IN GIVEN FOODSTUFFS.
I. DETERMINATION OF
CONCENTRATION/ MOLARITY OF KMNO4 SOLUTION BY TITRATING IT AGAINST A STANDARD
SOLUTION OF:
(i)
oxalic acid
(ii)
ferrous ammonium sulphate.
J. QUALITATIVE ANALYSIS
Determination of one
cation and one anion in a given salt (insoluble salts to be excluded):
Cations:Pb2+,
Cu2+, As3+, Al3+, Fe3+, Mn2+, Zn2+, Ni2+, Co2+,
Ca2+, Sr2+, Ba2+, Mg2+, NH4+
Anions: CO3 2-, S 2 -, SO3 2 -, SO4 2 -, NO2 - , NO3 -, Cl-, Br-, I-, PO4 3-,
C2O4 2-, CH3COO
PROJECT WORK
Wherever feasible may include
1)
Model Preparation
2)
Investigatory Project
Ø To prepare rayon thread
from filter paper by cupra ammonium process.
Ø Determine the oxalate
content of Guava fruits at different stages of ripening.
Ø Study of insecticides
and pesticides in various fruits and vegetables.
Ø To determine the amount
of casein present in different samples of milk from different sources.
Ø Preparation of soyabean
milk and its comparison with natural milk.
Ø To determine the
presence of adulterants in common foods such as sugar, butter, oil, red chilly paper,
turmeric powder, rice.
Ø Prevention of rusting
of iron by using cathode protection method.
3)
Science Exhibits.
4)
Participation in Science Fairs
Book Suggested:
Textbook of Chemistry
for class XII published by NCERT, New Delhi
BIOLOGY
Maximum Marks: 100
Theory: Marks 70 Time: 3 hour
Practicals: Marks 30
SECTION A (Zoology) 35
Marks
Unit-I : Reproduction Marks 11
Ø Asexual Reproduction: Uniparental, modes:
binary fission, sporulation, budding, gemmule, fragmentation, regeneration.
Ø Human Reproduction- Male and female
reproductive systems, Microscopic anatomy of testis & ovary; Gametogenesis
(spermatogenesis & oogenesis. Menstrual cycle), Fertilization, embryo
development upto blastocyst formation, implantation; Pregnancy and placenta formation
(elementary idea), Parturition (elementary idea) and Lactation (elementary
idea).
Ø Reproductive Health: Need for reproductive
health & prevention of Sexually Transmitted Diseases (STD), Birth control-
need & methods, Contraception and Medical Termination of Pregnancy (MTP),
Amniocentesis, Infertility & assisted reproductive technologies: IVF, ZIFT,
GIFT (Elementary idea for general awareness).
Unit–II: Genetics and
Evolution Marks 12
Ø Sex determination in
humans, birds and honeybee.
Ø Inheritance pattern of
Hemophilia and Color blindness in human beings.
Ø Mendelian Disorders in
humans: Chromosomal disorders in humans, Down’s syndrome, Turner’s &
Klinefelter’s syndromes.
Ø Genome and Human Genome
project.
Ø DNA fingerprinting.
Ø Origin of life:
Theories & evidences with special reference to Darwin & Modern
Synthetic theory of evolution, Hardy – Weinberg’s principal. Adaptive
radiation.
Ø Origin and evolution of
Man.
Unit-III : Biology and
Human Welfare Marks
07
Ø Health and Disease: Basic concepts of
immunology, vaccines; pathogens, paracites causing human diseases (Typhoid,
Hepatitis, Malaria, Filariasis, Ascariasis, Common Cold, Amoebiasis, Ring
Worm); Cancer, HIV and AIDS.
Ø Insects & human
welfare: Silk,
honey, lac.
Ø Adolescence, drug &
alcohol abuse.
Ø Poultry, Dairy Farming
Unit IV: Biotechnology
and its Application Marks
05
i)
Genetic Engineering (Recombinant DNA technology), cloning
ii)
Applications in Health: Human insulin & vaccine production, gene
therapy
iii)
Biosafety issues.
SECTION
B (Botany) Marks: 35
Unit-I: Reproduction in
Flowering Plants Marks:07
Ø Asexual Reproduction: Vegetative propagation
in plants, micropropagation.
Ø Sexual Reproduction: Flower structure, Development
of male & female gametophytes. Pollination: types, agencies & examples,
Out breeding devices. Pollen- Pistil interaction, Double fertilization, Post
fertilization events, Development of endosperm, embryo, seed and fruit. Special
modes: apomixes and polyembryony, significance of seed & fruit formation.
Unit-II: Genetics Marks
09
Ø Heredity and variation
Ø Mendelian inheritance,
Deviations from Mendelism: incomplete dominance, co-dominance, Multiple
alleles, Pleiotropy, Chromosomal theory of inheritance, Elementary idea of polygenic
inheritance, Chromosomes & genes,
Ø Search for genetic
material & DNA as genetic material: Structure of DNA & RNA, DNA packaging,
DNA Replication (Semiconservative), Central dogma, Protein Biosynthesis: Transcription,
translation, genetic code, Gene expression and regulation (lac-operon).
Unit-III: Biology and
Human welfare Marks: 07
Ø Plant breeding: Introduction, steps in
plant breeding and application of plant breeding, and single cell protein,
Biofortification.
Ø Tissue culture: Cellular totipotency,
technique and application of tissue culture
Ø Microbes in Human
Welfare: in
household food processing, industrial production, sewage treatment, Production
of energy (Biogas), biocontrol agent (Biopesticides) & Biofertilizers.
Ø Genetically Modified
organism- Bt crops
Ø Biopiracy and patents.
Unit- IV: Ecology and
Environment Marks: 12
Ø Meaning of ecology,
environment, habitat and niche: Organisms and environment.
Ø Population and ecological
adaptations: Population
Interactions-mutualism, competition, predation, parasitism. Population
attributes-growth, birth rate and death rate, age distribution.
Ø Ecosystems: Patterns, Components,
energy flow, nutrient cycling (carbon and phosphorus), decomposition and
productivity. Pyramids of number, biomass, energy. Ecological succession. Ecological
Services: Carbon fixation, Pollination, Oxygen release.
Ø Biodiversity and its
conservation: Threats
to, and need for biodiversity conservation. Hotspots, endangered organisms,
extinction, Red Data Book. Biodiversity conservation-biosphere reserves,
national parks and sanctuaries.
Ø Environmental Issues: Air and water pollution
and their control, solid waste management, agrochemicals and their effects, Radioactive
waste management, Green house effect and global warming, Ozone depletion in
stratosphere, Deforestation, Any three case studies as success stories addressing
environmental issues.
Practicals Time: 3 Hours Marks: 30
A.
External: 20
B.
Internal:10
Botany based Practicals: 15 Marks
i)
Internal assessment: 05 marks
ii)
External assessment: 10 marks
Zoology based Practicals:
15 Marks
i)
Internal assessment: 05 marks
ii)
External assessment: 10 marks
List of Experiments
1.
Study pollen germination on a slide.
2.
Collect and study soil from at least two different sites and study
them for texture, moisture content, pH and water holding capacity of soil.
Correlate with the kinds of plants found in them.
3.
Collect water from two different water bodies around you and study
them for pH, clarity and presence of any living organisms.
4.
Study the presence of suspended particulate matter in air at the
two widely different sites.
5.
Study of plant population density by quadrat method.
6.
Study of plant population frequency by quadrat method.
7.
Prepare a temporary mount of onion root tip to study mitosis.
8.
To study the effect of the different temperatures and three
different pH on the activity of salivary amylase on starch.
Study/observation of the
following (Spotting)
1.
Flowers adapted to pollination by different agencies (wind,
insect)
2.
Pollen germination on stigma through a permanent slide.
3.
Identification of stages of gamete development i.e. T.S. testis
and T.S. ovary through permanent slides. (from any mammal)
4.
Meiosis in onion bud cell or grasshopper testis through permanent
slides.
5.
T.S. of blastula through permanent slides.
6.
Mendelian inheritance using seeds of different color / size of any
plant.
7.
Prepared pedigree charts of genetic traits such as rolling of
tongue, blood groups, widow’s peak, and color blindness.
8.
Exercise on controlled pollination-Emasculation, tagging and
bagging.
9.
Identification of common disease causing organisms like Ascaris,
Entamoeba, Plasmodium, Ringworm through permanent slides or specimens. Comment
on symptoms of diseases that they cause.
10.
Two plants and two animals found in xerophytic conditions. Comment
upon their morphological adaptations.
11.
Plants and animals found in aquatic conditions. Comment upon their
morphological adaptations.
Book Prescribed:
A Textbook of Biology
for class XII published by NCERT, New Delhi.
ENVIRONMENTAL SCIENCE
Maximum
Marks: 100
Theory:
Marks 70 Time: 3 hours
Practicals:
Marks 30
A.
External : Marks 20
B.
Internal : Marks 10
The
subject deals with the interdependence of living things within their
environment and provides an insight into the orderly interplay of the factors
influencing environmental change. The impact of human demands on renewable and
non-renewable resources, and the limited availability of these resources in
nature, have been linked to correlate with patterns of human behavior necessary
to evolve a sustainable environmental paradigm.
AIMS:
“Environment
education should simultaneously attempt to create awareness, transmit information,
teach knowledge, develop habits and skills, promote values, provide criteria
and standards and present guidelines for problem solving and decision-making.
It, therefore, aims at both cognitive and affective behavior modifications. The
latter necessitates both classroom and field activities. This is an
action-oriented, project centered and participatory process leading to
self-confidence, positive attitudes and personal commitment to environment
protection. Furthermore, the process should be implemented through an
interdisciplinary approach.”
1.
To acquire knowledge of the origin and
functioning of the nature system and its correlation with the living world.
2.
To develop an understanding that human
beings, plants and animals are part of a natural phenomenon and are
interdependent.
3.
To appreciate the influence of human
activity on the natural processes.
4.
To develop awareness of the need and
responsibility to keep the natural system in a condition that sustains life.
5.
To develop sensitivity in personal
attitudes to environmental issues.
6.
To develop an understanding of how local
environments contribute to the global environment.
7.
To develop sense of responsibility and
concern for the welfare of the environment and all life forms which share this
planet.
8.
To develop a sound basis for further
study, personal development and participation in local and global environmental
concerns.
1. Action
on the Atmosphere: 10 marks
a) Control
of atmospheric pollution: methods; costing urgency, legislation; role of
government (local and national); responsibility of industry; role of
environmental organization.
b) Dilemma
of developing countries: development/ pollution equation; lack of economic capacity
to deal with atmospheric pollution; role of multinationals.
c) Satellite
imagery as a mean of monitoring the global environment.
d) Moving
towards urgent international action and changing attitudes to deal with the
causes and consequence of the damage of the ozone layer.
2. Population
and Conservation of Ecology 13 marks
a) Population
dynamics: factors causing population change (birth between immigration and emigration);
relation between the factor; age structure and its significance; population pyramids;
survivorship curves; three general shapes R and K strategies.
b) Human
populations (Malthusian model and demographic transition).
c) Population
regulation: growth without regulation (exponential); simple population
regulation (logistic growth curve); factors regulating population size (space,
food and water, territories, predators, weather and climate, parasite and
diseases, disasters and self-regulation).
d) Human
population control: family planning; education; economic growth; status of
women.
e) Threats
to the ecosystem: habitat destruction; genetic erosion; loss of diversity;
expanding agriculture; impound water; waste from human societies; increasing
human consumption.
f) Conservation:
importance; the critical state of Indian forests; conflicts surrounding
forested areas- populations and trebles and their rights -tourism -poaching -
roads – development projects - dams; scientific forestry and its limitations;
social forestry; the role of the forest department; NGOs; joint forestry
management; wild life - sanctuaries, conservation and management in India;
Project Tiger as a case study in conservation.
3. Planning
for Environmental Conservation and Protection 12
marks
a) Ecosystem
analysis: understanding complex systems; critical and state variables as system
indicator; indicators of inter-relationships; successions and systems
resilience; predicting and assessing system responses to impacts and their
interventions; rapid appraisal methods.
b) Human
environment interaction: quality of life Vs. quality of environment;
environmental issues and problems; role of belief and value; analyzing brief
statement for underlying values; issues analysis - separating symptoms from
problems; identifying the players and their positions; understanding
interacting problems and identifying critical control points; problems
analysis; identifying variables (human behaviors, values, ecological, etc); determining
the relationships between variables; formulating questions for research;
planning research; generating problems, solutions, briefs and specifications.
c) Evaluation
and assessment of impacts: approaches and techniques of environment and social
impact assessment; environment impact assessment as a planning tool and a
decision making instrument; interpreting environment impact assessments.
4. Technology
and Environment 12
marks
a) Technological
evolution and models: hi-tech; low-tech; intermediate; appropriate;
traditional; interaction between technology, resources environment and
development; energy as a binding factor; the need for reorienting technology.
b) Renewable
energy: limitations of conventional sources; sources of renewable energy and their
features (solar, wind, biomass, micro-hydel and muscle power)
c) Health:
incidents of disease as an indicator of the health of the environment;
prevention of diseases by better nutrition, sanitation, access to clean water,
etc.; communicable and non-communicable diseases; techniques of low cost
sanitation; policy and organization to provide access to basic health service
for all; the role of traditional and local systems of medicine.
d) Biotechnology:
potential; limitations.
5. Pollution
13
marks
a) Disruption
of nutrient cycles and habitats: atmospheric pollution; human activities that change
the composition of the atmosphere; connection between pollution and
development;local and global effects (greenhouse effect, ozone depletion) and
their impact on human life; burning of fossil fuel products- effect on
ecosystem and human health.
b) Pollution
control approaches-prevention and control: as applied to fossil fuel burning;
the role of PCBs; industrial pollution control-principles-devices-costs-policy
incentives; combating global warming; third world interest; impact on economic
growth. The international political dimensions; third world interest; impact on
economic growth.
c) Water
pollution: Water cycle; pollution of surface water, ground water, ocean water;
industrial pollution and its effects; domestic sewage and its treatment -
techniques and appropriate technology; marine ecosystem protection and coastal
zone management; soil pollution source - effects.
6. Legal
Regimes for Sustainable Development 10
marks
a) National
legislative frameworks for environment protection and conservation; survey of constitutional
provisions (including directive principles); national laws; state laws of
India.
b) International
legal regimes: on trade and environment (GATT, WTO, IPR, TNC regional arrangement
and preferential trade arrangements); on climate; on common resources (forests,
bio-diversities, oceans and space); international institutions (UNEP, UNCTAD, WHO,
UNDP, etc,); international initiatives (Earth Summit, Agenda 21).
Course Work / Project Work
Marks: 20
Suggested
Assignments
The
practical/project work carrying 20 marks has to be undertaken under the
guidance of the teacher and to be evaluated as a part of the External
Assessment. The project work could take one of the following forms:
2. Design
and conduct an environment impact assessment. The candidates may use secondary data,
demonstrate their capacity to collect and analyse primary data by incorporating
some primary data collected and use it in a few sectors of their work or
prepare an original study/essay (2000 words) on an area of the prescribed
curriculum that is indicative of his/ her appreciation/concern for
environmental issues and make a functional model to support the above.
3. Systematic
monitoring of an aspect of the local environment over a period of at least six months.
The candidate must use quantitative techniques of monitoring, sampling scientifically.
The data collection must be interpreted and presented in the form of a project
report (1500 words).
4. Conduct
a study on the density and population of plants growing in a particular area
using the quadral method and prepare a report.
5. Make
a field study of the effect of human interaction on the natural environment and
write a project report (1500 words) on the likely impact of the interaction on
the global environment.
6. Prepare
an original study/essay (2000 words) on an area of the prescribed curriculum
that is indicative of his/her appreciation/concern for environmental issues and
make a functional model to support the above.
TEXTBOOK
PRESCRIBED:
A textbook of
Environmental Science for class XII published by J and K State Bose in collaboration
with Foundation Books Pvt Limited, New Delhi.